Description

Raptor High Temp Caliper Enamel 1K Aerosol 360ml Satin Black is a heat-resistant coating designed to provide a durable, attractive finish on brake calipers and other suitable automotive components. Its convenient aerosol format allows for easy and precise application while providing resistance to heat, chemicals and road conditions.

What Raptor High Temp Caliper Enamel 1K Aerosol is for

Raptor High Temp Caliper Enamel is designed for coating brake calipers and other suitable automotive components exposed to high temperatures. It provides a durable satin black finish while helping protect the surface from heat, chemicals and everyday road conditions.

For suitable surface preparation, use Raptor High Temp Engine Enamel Primer before applying the engine enamel. For other high-temperature applications, explore Raptor High Temp Caliper Enamel and Raptor High Temp Roll Bar & Chassis coatings, using the appropriate primer or undercoat recommended for each product.

How to apply Raptor High Temp Caliper Enamel 1K Aerosol

1. Remove the caliper and thoroughly clean it, removing brake dust, grease, rust and other contaminants.
2. Lightly abrade the surface where required and remove all dust before painting.
3. Shake the can thoroughly before and during application.
4. Spray several light, even coats rather than one heavy coat, allowing sufficient drying time between coats.
5. Let the coating dry and cure fully before exposing the caliper to normal operating temperatures or returning the vehicle to use.

Raptor High Temp Caliper Enamel 1K Aerosol: key facts

• 1K caliper enamel aerosol, 360 ml, satin black
• Heat resistant up to 500°C
• Flash-off time: 10 minutes between coats
• Handling time: approximately 2 hours
• Final air-dry time: approximately 5 hours
• Resistant to impact, heat, brake dust, automotive fluids and corrosion
• 5× tougher than ordinary paints
• Smooth satin finish

Which colour / size to choose

Choose Raptor High Temp Caliper Enamel 1K Aerosol 360ml Satin Black for a durable, heat-resistant satin black finish on brake calipers and other suitable automotive components.

FAQ

Can it be applied directly to metal?
Yes. It can be applied directly to most properly prepared metals without a separate primer.

How long does it take to dry?
The coating is handleable after approximately 2 hours and reaches final air-dry after around 5 hours at 20°C.

Is it resistant to brake dust and automotive fluids?
Yes. It is designed to resist brake dust, automotive fluids, impact, heat and corrosion.