Description

Raptor High Temp Engine Enamel 1K Aerosol 360ml Bright Red is a professional-grade engine enamel designed to provide a durable, heat-resistant finish on engine blocks, engine accessories and other suitable surfaces in the engine compartment. Its ceramic resin technology provides excellent adhesion, corrosion resistance and protection against automotive fluids.

What Raptor High Temp Engine Enamel 1K Aerosol is for

Raptor High Temp Engine Enamel is designed for engine blocks, engine accessories and other suitable surfaces in the engine compartment. It provides heat resistance up to 300°C while helping protect surfaces from corrosion, oil and other automotive fluids.

For suitable surface preparation, use Raptor High Temp Engine Enamel Primer on compatible metal surfaces before applying the enamel. For other high-temperature applications, see Raptor High Temp Caliper Enamel and Raptor High Temp Roll Bar & Chassis coatings, using the appropriate primer or undercoat recommended for each product.

How to apply

1. Clean and degrease thoroughly, removing oil, grease, dirt and other contaminants.
2. Sand as required and remove all dust before painting.
3. Use Raptor Engine Enamel Primer on suitable bare or difficult-to-prepare substrates.
4. Shake thoroughly before use.
5. Spray 2 light, even coats, allowing the recommended drying time between coats.
6. Let the coating cure fully before exposing it to normal engine operating conditions.

Raptor High Temp Engine Enamel 1K Aerosol: key fact

• 1K high-temperature engine enamel aerosol, 360ml, bright red
• Heat resistant up to 300°C
• Touch dry: approximately 30 minutes
• Overcoat within 1 hour without sanding
• Suitable for engine blocks and engine accessories
• Excellent adhesion and corrosion resistance
• 2 coats recommended
• Resistant to automotive fluids
• Smooth, durable finish

Which colour / size to choose

Choose Raptor High Temp Engine Enamel 1K Aerosol 363ml Bright Red for a durable, heat-resistant bright red finish on engine blocks, engine accessories and other suitable engine-compartment surfaces.

FAQ

How many coats should I apply?
2 coats are recommended.

How long does it take to dry?
It is touch dry in approximately 30 minutes.

Can it be overcoated?
Yes. It can be overcoated with itself within 1 hour without sanding.
Does it resist automotive fluids?
Yes. Once cured, it provides good chemical resistance against automotive fluids.
What finish does it provide?
It provides a smooth, durable bright red finish.