What Raptor High Temp Flameproof Paint 1K Aerosol is for

Raptor High Temp Flameproof Paint is designed for suitable metal components exposed to intense heat, such as exhaust parts, manifolds and other high-temperature automotive or industrial surfaces. It provides a flat black finish intended to withstand elevated temperatures when applied and cured according to the manufacturer’s instructions.

For optimal results, apply Raptor High Temp Flameproof Primer 1K Aerosol Grey to properly prepared bare metal before applying the flameproof paint. For alternative high-temperature finishes, see Raptor High Temp Flameproof Paint 1K Aerosol 360ml Satin Clear. Follow the manufacturer’s preparation, application and curing instructions for each product.

How to apply

1. Clean and degrease bare steel thoroughly, removing dirt, oil and other contaminants.
2. Sand with P180–P220 abrasive and remove dust.
3. Prime bare metal with a compatible Raptor High Temp Flameproof Primer and allow it to dry.
4. Shake for at least 2 minutes before use and re-shake for 30 seconds between coats.
5. Spray 2–3 even coats from approximately 25 cm away, allowing 10 minutes between coats at 20°C.
6. Touch dry in approximately 30 minutes. Allow to dry overnight, then follow the manufacturer’s heat-curing instructions before exposing the coating to high temperatures.

Raptor High Temp Flameproof Paint 1K Aerosol: key facts

• 1K flameproof paint aerosol, 340ml, flat black
• Heat resistant up to 1000°C intermittently
• Flash-off time: 10 minutes
• Touch dry: 30 minutes
• Suitable for exhaust manifolds, headers and exhaust systems
• Provides protection against heat, oil and automotive fluids once fully cured
• 2–3 coats recommended
• Shelf life: 2 years

Which colour / size to choose

Choose Raptor High Temp Flameproof Paint 1K Aerosol 340ml Flat Black for a durable, heat-resistant flat black finish on exhaust manifolds, headers, exhaust systems and other suitable high-temperature metal surfaces.

FAQ

What is Raptor High Temp Flameproof Paint used for?
It is designed for exhaust manifolds, headers, exhaust systems and other suitable surfaces exposed to very high temperatures.

Do I need a primer?
Yes. The manufacturer recommends using a compatible Raptor High Temp Flameproof Primer on properly prepared bare metal.

Does the coating need heat curing?
Yes. Follow the manufacturer’s instructions to achieve full cure and heat resistance.

What finish does it provide?
It provides a smooth flat black finish.