Description

Raptor High Temp Wheel Paint 1K Aerosol 380ml Gloss Black is a durable coating designed to give compatible wheels a smooth, high-gloss black finish. Its convenient aerosol format makes it suitable for wheel refinishing and touch-ups, helping improve the appearance of wheels while providing a protective coating against everyday wear and environmental exposure.

What Raptor High Temp Wheel Paint 1K Aerosol is for

Raptor High Temp Wheel Paint is designed for refinishing compatible automotive wheels with a glossy black finish. It provides a practical option for restoring the appearance of wheels and protecting properly prepared surfaces. For best results, clean and prepare the wheel carefully and follow the manufacturer’s application and curing instructions.

For a suitable protective finish, explore Raptor High Temp Wheel Paint 1K Aerosol 378ml Satin Black. This wheel paint is designed for primed metal wheels, including steel, aluminium and alloy wheels. Ensure the surface is properly prepared and primed before applying the topcoat.

How to apply

1. Clean and degrease the wheel thoroughly, removing brake dust, dirt, oil and loose coatings.
2. Remove rust and loose material, then sand the existing paint or primer with P400–P600 abrasive paper.
3. Do not apply directly to bare metal; use a suitable primer and allow it to dry according to its instructions.
4. Ensure the surface is clean and dry before painting.
5. Shake the aerosol for at least 2 minutes before use and re-shake for approximately 30 seconds between coats.
6. Apply 2–3 light, even coats from approximately 15–25cm away, allowing 5–10 minutes between coats.
7. Allow approximately 30 minutes to become touch dry at 20°C. Leave to dry overnight before use.
8. Follow the product label and technical data sheet for full application and safety instructions.

Raptor High Temp Wheel Paint 1K Aerosol: key facts

• 1K Wheel Paint aerosol, 380ml, gloss black
• Heat resistance: up to 120°C
• Flash-off time between coats: 5–10 minutes
• Touch dry: approximately 30 minutes at 20°C
• Drying before use: leave overnight
• Theoretical coverage: approximately 2.7m² per can under specified conditions
• Designed for primed metal wheels, including steel, aluminium and alloy wheels
• Helps protect against stone chips, brake dust, impact and corrosion
• UV-resistant finish helps resist fading
• Suitable primer required for bare metal surfaces

Which colour / size to choose

Choose Raptor High Temp Wheel Paint 1K Aerosol 380ml Gloss Black for a glossy black finish on properly prepared and primed metal wheels, with protection against everyday wear, brake dust and stone chips.

FAQ

What is Raptor High Temp Wheel Paint used for?
It is designed to refresh and protect compatible automotive wheels, including steel, aluminium and alloy wheels that have been properly primed.

Can it be applied directly to bare metal?
No. The manufacturer recommends applying it to primed metal wheels rather than bare steel.

How long does it take to dry?
It becomes touch dry in approximately 30 minutes at 20°C. Allow it to dry overnight before use.
Does it protect against brake dust and stone chips?
Yes. It is designed to help protect wheels against brake dust, stone chips, impact and corrosion.