Description

Raptor 2K Aerosol 400ml Black is a two-component protective coating designed to deliver a tough, durable black finish with the convenience of an aerosol. Its activated formula provides resistance to scratches, abrasion, chemicals and weathering, making it suitable for automotive refinishing and smaller protective coating projects.

What Raptor Liner Aerosol Black is for

This aerosol is intended for coating and refinishing suitable automotive and metal components where a durable black finish is required. It is useful for smaller repairs and targeted applications on properly prepared surfaces, without the need for a separate spray gun.

For projects that require a white textured protective finish, consider the Raptor 2K Aerosol 400ml White. For larger areas that need a similar durable protective coating, the Raptor Four Bottle Kit 3.79L Black is a practical alternative.

How to apply Raptor Liner Aerosol Black

1. First, clean and prepare the surface. On bare metal or bare plastic, use the matching primer or adhesion promoter first.
2. Then activate the 2K aerosol as described on the can.
3. Activate the hardener by pressing the valve on the base of the can.
4. Apply at a distance of approximately 60–90cm to create a textured finish.
5. Apply at least two coats, allowing approximately 20 minutes between coats.
6. After activation, use the product within 12 hours.
7. Allow less than 60 minutes for handling at 20°C and 5–7 days for full cure. Avoid exposing the coating to demanding conditions before it has fully cured.

Raptor Liner Aerosol Black: key facts

• 2K aerosol, 400 ml, black
• Coverage: 1.3 m² per can
• Flash-off time: 20 minutes
• Handling time: 60 minutes
• Fully cured: 5–7 days
• Pot life after activation: 60 minutes
• Resistant to water, UV, petrol, diesel, thinners and oils
• Resistant to urine, salt, most acids and bases
• Scratch resistant

Which colour / size to choose

Choose Raptor 2K Aerosol 400ml Black for a durable black textured finish on smaller automotive projects, repairs and suitable surfaces that need a tough protective coating. The convenient aerosol format makes it ideal for targeted applications without specialist spray equipment.

FAQ

What is Raptor 2K Aerosol used for?
It provides a durable, textured protective coating for small projects and spot repairs.
Does it need a spray gun?
No, it is applied directly from the aerosol.
How do I activate the aerosol?
Shake thoroughly, then press the valve on the base of the can to activate the hardener.
How many coats should I apply?
Apply at least two coats, allowing approximately 20 minutes between coats at 20°C.
How long can I use it after activation?
Use the activated product within 12 hours.
When can I apply another coating over it?
After 6 hours without additional preparation. If more than 24 hours have passed, lightly abrade and degrease the surface first.