Description

Description

Raptor Liner Aerosol White is a 2K protective coating in a 400 ml aerosol for practical coating work where a mobile and convenient application is needed. This raptor liner aerosol white variant is particularly suitable when a white finish is preferred, including on light-coloured vehicles, truck beds, sills, chassis parts and small surface repairs.

What it’s for

This aerosol is intended for targeted coating work on truck beds, sills and chassis parts, as well as small surface repairs. Its mobile format also makes it suitable for remote use where transporting larger application equipment is less practical.

The coating is not suitable for bare plastic without an adhesion promoter, bare metal without primer or rubber. For bare plastic, use Raptor Adhesion Promoter 450ml. For bare metal, use Raptor Anti-Corrosive Epoxy Primer or Raptor Etch Primer as appropriate.

How to apply

1. Prepare the surface and ensure it is suitable for coating.
2. Do not apply directly to bare plastic, bare metal or rubber. Use the appropriate preparation product where required.
3. Activate the 2K aerosol according to the product instructions.
4. Apply the coating to the prepared surface.
5. Allow 20 minutes flash-off time before proceeding as required.
6. Allow 60 minutes handling time and leave the coating to fully cure for 5–7 days.

Key facts

• 2K aerosol, 400 ml, white
• Coverage: 1.3 m² per can
• Flash-off time: 20 minutes
• Handling time: 60 minutes
• Fully cured: 5–7 days
• Pot life after activation: 60 minutes
• Resistant to water, UV, petrol, diesel, thinners and oils
• Resistant to urine, salt, most acids and bases
• Scratch resistant

Which colour / size to choose

Choose the 400 ml white aerosol when white is the required finish or when you want the coating to complement a light-coloured vehicle. This variant is suitable for truck beds, sills, chassis parts, small surface repairs and mobile work. Choose a different colour when the required finish calls for another shade, or another size when the application requires a different format or coverage.

FAQ

Can I apply it directly to bare metal?

No. Bare metal must be primed before applying the coating. Raptor Anti-Corrosive Epoxy Primer and Raptor Etch Primer are related products in our range.

Can I use it on bare plastic?

No. Bare plastic requires an adhesion promoter before applying the coating. Raptor Adhesion Promoter 450ml is the related product for this application.

How long does the coating take to fully cure?

The coating is fully cured after 5–7 days. The stated handling time is 60 minutes.