Description

Raptor Anti-Corrosive Epoxy Primer Aerosol Beige is a protective epoxy primer in a 400 ml aerosol, designed to provide corrosion protection and a durable base for subsequent coatings. It is suitable for bare and prepared metal surfaces, small repairs, and applications where a convenient, portable primer is needed.

What Raptor Anti-Corrosive Epoxy Primer is for

This primer is designed to protect metal surfaces against corrosion and provide a strong, durable base for subsequent coatings. It is particularly suitable for bare metal, repairs, and areas requiring additional corrosion protection.

The primer is designed for bare and properly prepared metal surfaces and is not suitable for direct application to bare plastic or rubber. For bare plastic, use Raptor Adhesion Promoter 450ml first. For surfaces requiring an alternative metal preparation, use Raptor Etch Primer as appropriate.

How to apply Raptor Anti-Corrosive Epoxy Primer

1. Clean and degrease the surface thoroughly, removing dirt, grease, rust, and other contaminants.
2. Sand the surface as required to provide a suitable key for the primer.
3. Shake the aerosol thoroughly before use and apply the primer in light, even coats.

4. Allow the recommended flash-off time between coats and apply additional coats as required.

5. Allow the primer to dry fully before sanding or applying the appropriate topcoat.

Raptor Anti-Corrosive Epoxy Primer Beige: key facts

• Primer Aerosol, 400ml, Beige
• Flash-off time: 10-15 minutes
• Handling time: approximately 1 hour
• Pot life after activation: 48 hours
• Coverage: approx. 1.0–1.2 m² per can
• Provides anti-corrosive protection and strong adhesion to properly prepared surfaces
• Suitable for bare and prepared metal surfaces

Choose RAPTOR Anti-Corrosive Epoxy Primer Aerosol 400ml Beige for convenient corrosion protection and reliable priming of bare and prepared metal surfaces.

FAQ

What is RAPTOR Anti-Corrosive Epoxy Primer used for?
It is used to protect metal surfaces from corrosion and provide a durable base for subsequent coatings.

What surfaces can it be applied to?
It is designed primarily for bare and properly prepared metal surfaces.

Can it be applied directly to bare plastic?
No. Use a suitable plastic adhesion promoter before applying the primer.

Does it need to be activated?
Yes. As a 2K aerosol, it must be activated according to the instructions on the can before use.