Raptor High Temp Flameproof Paint 1K Aerosol 350ml Flat Red is a heat-resistant coating designed for suitable metal surfaces exposed to extremely high temperatures. Its convenient aerosol format allows for easy application, providing a durable flat red finish for exhaust systems, manifolds and other compatible high-temperature components.

What Raptor High Temp Flameproof Paint 1K Aerosol is for

Raptor High Temp Flameproof Paint is designed for suitable metal components exposed to intense heat, including exhaust manifolds, headers and exhaust systems. It provides a flat red finish intended to withstand elevated temperatures when applied and cured according to the manufacturer’s instructions.

For suitable surface preparation, use a compatible Raptor High Temp Flameproof Primer on properly prepared metal before applying the paint. For an alternative finish, see Raptor High Temp Flameproof Paint 1K Aerosol 360ml Satin Clear. Both products are intended for compatible high-temperature applications, so follow the manufacturer’s instructions for surface preparation and curing.

How to apply

1. Clean and degrease thoroughly, removing oil, grease, dirt and other contaminants.
2. Prepare the metal according to the manufacturer’s instructions and remove all dust.
3. Use a compatible Raptor High Temp Flameproof Primer on bare metal as recommended.
4. Shake for at least 2 minutes before use and for 30 seconds between coats.
5. Spray 2–3 even coats from approximately 25 cm away, allowing around 10 minutes between coats at 20°C.
6. Allow the coating to dry fully and follow the manufacturer’s heat-curing instructions before exposing it to high temperatures.

Raptor High Temp Flameproof Paint 1K Aerosol: key facts

• 1K flameproof paint aerosol, 350 ml, flat red
• Heat resistant up to 1000°C
• lash-off time: 10 minutes between coats
• Dust-free: 30 minutes
• Suitable for exhaust manifolds, headers and exhaust systems
• Resistant to heat, oil and other automotive fluids once fully cured
• 2–3 coats recommended
• Shelf life: 2 years
• Smooth flat finish

Which colour / size to choose

Choose Raptor High Temp Flameproof Paint 1K Aerosol 350ml Flat Red for a durable, heat-resistant flat red finish on exhaust manifolds, headers, exhaust systems and other suitable high-temperature metal surfaces.

FAQ

Do I need a primer?
The manufacturer recommends a compatible Raptor High Temp Flameproof Primer for suitable metal surfaces.

Does the coating need to cure before exposure to high temperatures?
Yes. Follow the manufacturer’s curing instructions to achieve the intended heat resistance.

What finish does it provide?
It provides a smooth flat red finish.